Curtis SCR4986 - Manual (Page 10)

Clock Setting
The clock can be only set while the unit is in standby mode
1. While the unit is in standby mode, press the TIME_SET button into clock setting. The LED
display will start flashing, press REV/DOWN or FF/UP to select 12h display or 24h display.
Confirm your setting by press TIME_SET again
2. While the unit is in standby mode, press and hold the TIME_SET button for 2-3 seconds, the
hours will start flashing, press REV/DOWN or FF/UP to set the current hour, press the
TIME_SET button to confirm the setting, then the minutes will start flashing, press
REV/DOWN or FF/UP to set the current minutes, press the TIME_SET again to confirm all
setting. The time is now set
Alarm Setting
1. While the unit is in standby mode, press ALARM1/2 to open and close the alarm function
2. While the unit is in standby mode, press and hold ALARM1/2 for 2-3 seconds, the alarm hour
will start flashing, press REW/TUN- or FF/TUN+ to set your desired hour, press the ALARM
1/2 again, then the alarm minutes will start flashing, press REW/TUN- or FF/TUN+ to set
your desired minutes, press the ALARM 1/2 again to set alarm mode, you can press
REW/TUN- or FF/TUN+ to set alarm buzzer or alarm radio or alarm CD, press the ALARM
1/2 to confirm the setting
3. When the current time is same as the alarm set time, ALARM 1/2 will start flashing, the alarm
will be activated (the alarm will be closed 1 hour later if without any operation). Press
SNOOZE button into sleep mode, the alarm will activated again 9 minutes later, press any
buttons (except the SNOOZE button) to close the alarm today
Remark: If can’t read the CD information, the alarm CD will change to alarm buzzer automatic
Sleep function
Auto power-off function
When the unit is powered on, press SLEEP button to set the sleep time to “90-60-30-15-OFF”, the
unit will power off then
USB Charging mobile Battery
Please be noted that unit only go with USB charge while Stand-By mode , Not CD playing mode.
1. Connect to your mobile phone to USB socket when unit is in Stand-By mode.
2. At this moment,your mobile will start charging and battery charge icon will show on
mobile phone display.