Electrolux EWF 14170 W - Manual (Page 13)

use electrolux 13
● The door will be locked throughout
the delay time. If you need to open
the door, you must first set the
washing machine to PAUSE by
pressing the Start/Pause button and
then wait about 2 minutes. After you
have closed the door, press the
Start/Pause button again.
The Delay Start can not be selected
with Drain
programme.
Programme progress display
After having pressed the Start/Pause
button, the “wash”
pilot lights
comes on.
When the pilot light “wash” comes on
this means that the machine is
performing the washing cycle. If you
have selected the “prewash”
function, this light will be on during the
prewash phase too.
The “door” pilot light indicates if
the door can be opened:
● on: the door cannot be opened.
The appliance is running.
● light off: the door can be opened.
The washing programme is finished.
● flashing light: the door is opening.
When the programme has finished, the
“End”
pilot light comes on.
Altering an option or a running
programme
It is possible to change any option
before the programme carries it out.
Before you make any change, you must
pause the washing machine by pressing
the “Start/Pause” button.
Changing a running programme is
possible only by resetting it. Turn the
programme selector dial to “O” and
then to the new programme position.
Start the new programme by depressing
the “Start/Pause” button again. The
washing water in the tub will not emptied
out.
Interrupting a programme
Depress the “Start/Pause” button to
interrupt a programme which is running,
the corresponding light starts to flash.
Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to “O” to cancel
a programme which is running. Now
you can select a new programme.
132967750_EN.qxd 29/10/2007 9.57 Pagina 13