Curtis SP399 - Manual (Page 12)

device. If the unit finds the paired Bluetooth® device, a beep sound is heard
and The “bLUE” symbol stops flashing.
2.After successfully pairing (linking), you can begin playing music from your
Bluetooth® device wirelessly to the speaker.
3.Press the +/- button on the speaker to adjust to the desired volume level.
4.To stop the unit, press and hold the Play/Pause on main unit to turn off the
device.
OPERATING IN AUX-IN MODE
If you do not have a Bluetooth® function available:
If you are using an iPod, MP3/MP4 player or other mobile phone which cannot
connect this unit via Bluetooth® directly. You can still play it on the speaker via
an audio connecting cable(included).
1.Plug one end of the 3.5mm audio cable (included) into the headphone or line
out jack on your player, plug the other end or cable into the unit AUX-IN jack of
the speaker.
2.Turn on the external audio source and play your device.
3.Press M Button until “AUX” shows up in the display to enter the AUX-IN
mode.
4.The volume level can now be controlled through the main unit. Operate all
other functions on the external device as ususl.
10