Curtis FRF452B - Manual (Page 4)

English
PARTS AND FEATURES
1.temperature control adjustment 4.power on indicator(red)
2.vinyl coated wire basket 5.compressor on indicator(green)
3.inside drain dial
INSTALLING YOUR FREEZER
Unpacking your freezer
 Remove all packaging material. This includes the foam base and all adhesive tape
holding the freezer accessories inside and outside.
 Inspect and remove any remains of packing, tape or printed materials before
powering on the freezer.
Adjusting your freezer
 your freezer is designed for freestanding installation only. It should not be
recessed or built-in.
 place the freezer on a floor strong enough to support it fully loaded.
 When moving the freezer, never tilt it more than a 45-Degree angel. This could