Curtis PCR1986 - Manual (Page 7)

RADIO
BLUETOOTH AND LINE IN
7
Radio Reception
An FM antenna is built into the unit. To improve FM radio reception, adjust
the position of the unit.
Tuning the FM Radio
1. Press the POWER/SOURCE BUTTON to turn the unit on.
2. Press the POWER/SOURCE BUTTON to switch to FM Radio Mode.
3. Press SKIP / TUNE BUTTON to tune the radio manually
4. Hold down the SKIP / TUNE button to scan for available stations.
Saving and Playing a Station as a Preset
1. Tune to the desired station
2. Press the MEMORY / CLOCK BUTTON. Preset number will appear
on the displays
3. Press the SKIP / TUNE BUTTON to adjust to the desired preset number.
4. Press the MEMORY / CLOCK BUTTON to save the current radio station
to the selected preset.
5. Press the MEMORY / CLOCK BUTTON to cycle through preset radio stations.
Pairing a Bluetooth Device for the First Time
1. Power on and the unit by pressing the POWER/SOURCE BUTTON .
2. Press the POWER/SOURCE BUTTON to switch to Bluetooth mode. The
Pairing indicator will flash slowly.
3. Press the PAIR BLUETOOTH / PLAY / PAUSE BUTTON. The pairing
indicator will flash quickly. When pairing remain within 3 feet of the unit.
4. Using the native controls on your Bluetooth device, select the
PCR1986 in your Bluetooth settings to pair.
5. If your device requrests a password, enter the default password 0000.
6 . Refter to the user’s manual for your specific device for instructions on
pairing and connecting Bluetooth devices.
7. When successfully paired and connected, the Pairing indicator will be
solid.
8. Atfer initial pairing, the unit will stay paired unless unpaired manually by
the uswer or erased due to the reset of the device
9. If your device should become unpaired or you find it is unable to
connect, repeat the above stleps or press the
PAIR BLUETOOTH / PLAY / PAUSE BUTTON to start the pairing
process again