Curtis PCR1986 - Manual (Page 6)

CLOCK AND SLEEP
ALARM
6
Setting the Clock
1. With the power off, press and hold the MEMORY/CLOCK BUTTON.
Press the SKIP/TUNE BUTTON to select 12HR or 24HR mode.
2. Press the SKIP/TUNE BUTTON to adjust the hour.
3. Press the MEMORY/CLOCK BUTTON again to adjust the minutes. The
minutes on the display will begin flashing.
4. Press the SKIP/TUNE BUTTON to adjust the minutes.
5. Press the MEMORY/CLOCK BUTTON to finish setting the time, or wait
for the display to stop flashing.
SETTING SLEEP TIMER
When listening to radio, press SLEEP BUTTON to enter sleep mode. You
can just adjust the sleep timer from 10 to 90 minutes by pressing the
SLEEP BUTTON.
The unit will automatically turn off after the selected time expires.
Setting the Alarm
1. If in radio mode, press and hold the POWER / SOURCE BUTTON to
turn the unit off.
2. Press and hold ALARM ONE BUTTON or ALARM TWO BUTTON.
3. Press the SKIP/TUNE BUTTON repeatedly to switch between wake by
bb (Buzzer),rad (Radio) or bt (Bluetooth) mode.
4. Press the SKIP/TUNE BUTTON to adjust the hour.
*The PM indicator will light when the hour is set in the PM
5. Press the SKIP/TUNE BUTTON to adjust the minute.
*The Alarm One or Alarm Two indicator will come on.
6. Once the set alarm time is reached, the alarm will sound.
7. To set the other alarm, follow the above steps and choose the alarm
not currently set.Cancelling the Alarm
Note: In alarm wake by Bluetooth mode, if the clock radio cannot pair or
playback the music from the Bluetooth device. It will automatic change
to Buzzermode within 20 seconds.
1. Follow the insurtcions for Setting the Alarm.
2. Press the ALARM ONE BUTTON or VALARM TWO BUTTON
repeatedly until the indicator is no longer lit. When the Alarm sounds
Press SNOOZE BUTTON to delay for an additional 9 minntes.
Press POWER / SOURCE BUTTON to turn the alarm off until the set
alarm time is reached again.