Curtis VR269 - Manual (Page 7)

6
- Note that the SD Card has a tiny LOCK switch on the side. Set the
switch to the un-LOCK position to store recorded videos and still
pictures.
2.3 Powering on/off
In the power-off state, press and hold the power key to power on the
camera.
In the power-on state, press the power key to power off the camera.
In the power-on state, let the camera idle for 1 minute（default）to power off the camera
automatically.
In power-on state, when the battery level is very low, the camera will turn off after several
seconds and you must replace the battery.
2.4 Menu Setting
Under picture taking/recording mode,press "SET" key to open set menu and then press the
up/down/left/right key to select menu. Press OK or right key to enter the submenu. When
selecting menu, the background of the selected menu option will be displayed in blue.