Curtis IP1035 - Manual (Page 15)

14
PROBLEM SOLUTION POSSIBLE CAUSE
GENERAL
No sound is heard. Power is not on.
VOLUME Control is set
to minimum.
Mute is on.
Press the POWER button.
Adjust the VOLUME
Control.
Press Mute on remote.
RADIO
Station has not been
tuned properly.
FM reception is weak.
Wrong function is
selected. Press the FUNCTION
button to the radio
position.
No sound is heard.
Tune station properly .
Extend the FM cord.
TROUBLESHOOTING GUIDE
iPod does not
dock properly Using no or wrong iPod insert. Make sure the dock insert is the
proper fit for your iPod.
iPod didn’t install properly . Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod . Then reseat it in the dock.
iPod does not
respond to the
unit
iPod is not installed properly. Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod . Then reseat it in the dock.
iPod is locked up. Please make sure your iPod is
working properly before docking into
the unit. Please refer to your iPod
manual for details.
iPod didn’ t
charge up
iPod is not installed properly . Remove your iPod from the dock
and check for obstruction on the
connectors in the dock and on your
iPod . Then reseat it in the dock.