Curtis IP1035 - Manual (Page 12)

OPERATING INSTRUCTIONS
11
Programming radio station presets:
You can program as many as 10 FM and 10 AM radio station presets.
To program a radio station:
1.
2.
Press the FUNCTION Button one or more times until
on the display
3. Press the BAND Button to select AM or FM.
4. Press and hold one of the SKIP/TUNE UP or DN Buttons to select a radio
5.
6.
Press one of the SKIP/TUNE UP or DN Buttons to select the preset number
7. Press the MEM/CLK Button to store the station with the preset number you
8. Repeat Steps 4 through 7 to program additional presets.
To tune to a radio station preset:
1.
2.
Press the FUNCTION button one or more times until
the display.
3. Press the STOP/BAND Button to select
4. Press the M– or M+ Button one or more times until the preset number you
want appears on the display.
To select an equalizer mode:
To select volume sound
Press the VOLUME UP
MUTE Function
Press the MUTE Button (Remote) to muting the speaker sound, press again to
cancel.
To select DBBS
Slide the DBBS switch to select high/mid/low bass sound.
or DN Buttons to increase or decrease volume sound.
Y
* Classic
* Jazz
* Rock