Eclipse - Fujitsu Ten 316SW User Manual
Page 8
Phase select switch
This switch is used to select the speaker
phase.
The ambience of the sound being listened to
may change when the position of this switch is
changed.
The effects will change depending on the main
speaker combination being used and on the
setting-up environment, so listen to the sound
being played back and select the switch
setting that provides the most natural
playback.
When you change a switch , please make
volume small for noise prevention.
Power switch
This switch turns the power on and off.
LINE IN terminal
This terminal is used to input signals that are
output from the LINE OUT terminal of a sub-
woofer (super woofer) of an AV amplifier or
directly from an amplifier.
LINE OUT terminal
This terminal outputs the signals that are input to
the terminal in 6. above.
It can be used when another unit or 508PA
connected to this unit. (The volume
adjustment knob of this unit will not work for
both units.)
Power input terminal
This terminal is used to connect the unit via
the attachment power cord to a 230 V
household electrical outlet.