Curtis PLED2243B - Manual (Page 18)

32 33
Others Menu
Blue Back Set the screen background color blue or not when no valid signal input.
When analog TV input and has no signal, snow noise will display if this option is cleared.
No Signal Power Off If it is set, TV will automatically enter standby after 10 minutes
without signal input.
No Operation Power Off If it is set, TV will enter standby after 3 hours without any
operation.
All Reset When you highlight the item, the system will note you that Attention! If
[All Reset] was executed, TV system is reset” And if you are sure to reset, press ENTER
to reset .
Audio Only When you highlight the item, the system will note you that “ Attention!Hold
on power key 3 second to restore video”, and if you are sure not need to view
(backlight is turned off ), press ENTER to confirm automatically. As the attention, if
you want to wake up the video, please hold on the power button for 3 seconds.
Clock
Time Zone Hawaii/Alaska /Pacific /Central/Mountain/ Eastern / Samoa/Newfounland/
Altantic
Auto Clock If set it to ON , the TV will sync the local clock according to the DTV
broadcasting time automatically. Otherwise you can set the time manually.
Setup Time Set Auto Clock to Off, then you can set the time manually .
Note: In the case of loss of power, the clock setting will be lost.
Day of Week The TV will calculate current day of week according to the time.
Daylight Saving Time When Auto Clock set to ON, this item is available to enable
daynight saving option or not.