Ò³ãæ 11 – Curtis PLED2243B User Manual

Page 11

Sound Menu

Set the preferred sound track of analog channels. Stereo and SAP exist on some
channels. Generally SAP is a second language sound or help the people with
hearing impair.

Set the preferred sound track of digital channels. French exist on some channels.

Set the audio output type of coax or optical terminal. Raw means output the original
format of audio stream. PCM can be matched with most AV amplifiers.

Set the sound mode, and Bass /Treble/Balance, see page 20.

Sound Settings

Set to enjoy the virtual surround sound. Press ENTER to set or cancel.

Surround Mode

AVL Auto Volume Level. Press ENTER to set or cancel. When AVL is set on, it will limit
the sound being heard when sudden changes in volume occur during commercial breaks
or channel changes. Usually be enabled at night.

Available at analog TV channels. SAP/Stereo/Mono

Analog Sound

Available at digital TV channels. English/French

Digital Sound

Digital Audio Output

PCM/Raw/Off

Equalizer Settings

Adjust the curve of 7 bands equalizer, see page 21.

Advanced Picture Settings

Press to highlight the item and press to change the setting as following.

Dynamic Contrast

Off/Low/Medium/High

The system will adjust the luminance curve by analyzing the picture content dynamically.

Film Mode Off/On

For the 2:2 or 3:2 format signal of cinema , enable special pix

Moving area.

Noise Reduction

Off/Low/Medium/High

You can clear up analog TV signal by reducing the dot noise. This feature is not available
at PC or Media source.

MPEG Noise Reduction

Off/Low/Medium/High

Similar with the Noise Reduction, you can set to reduce the block noise.