Emerson Radio Barbie BAR504 - Manual (Page 8)

POWER SOURCES
7
This CD player requires either six (6) “C” batteries (not included) or an AC
adapter (not included).
BATTERY INSTALLATION
1. Remove the Battery Compartment door
turning the two screws counterclockwise
as shown and lifting the door off.
2. Insert six (6) “C” batteries (not included)
according to the polarity diagram inside
the Battery Compartment. Alkaline
batteries are recommended for the
longest playing time.
3. Replace the battery
compartment and trun
the two screws
clockwise to lock.
AC OPERATION
To operate the unit using AC power, connect an
AC adapter (not included) to an AC outlet having
120V, 60Hz AC. Plug the small end into the DC
9V IN z jack on the left side of the unit and
connect the other end into the AC outlet. The
batteries are automatically disconnected when
the AC adapter is used.
CAUTION: When not using AC power, disconnect
the AC adapter from the wall outlet by pulling the
plug (not the cord). Do not touch the AC adapter with wet hands. Fully insert
the plug without exposing any part of the blade.