Curtis RLC3257B - Manual (Page 9)

32 / 37 / 40 / 42 / 47 T7系列共用 中性英文说明书(美洲ATSC )(MSD 318方案)
7
Installation and Connection Installation and Connection
" "
" -1" or "HDMI-2"
Use the composite cable to connect the video
and audio output interfaces on the AV device
respectively to the video and audio input
interfaces on the TV.
Through S-VIDEO/AUDIO cables to connect
external AUDIO/VIDEO equipment to the
machine's AUDIO/VIDEO input port, and press "SOURCE" key to select "SV" si
l source.
If the signal source comes from a DVD player, set-top box or device with YPbPr/YCbCr output
interface, you are recommended to connect the YPbPr/YCbCr output interface to the YPbPr/YCbCr
input interface on the TV for a better image quality. Meanwhile, please connect the audio output
interface to the audio input interface on the TV. See the figure below. To select the YPbPr/YCbCr
signal, please set the input signal source to be component mode.
Use the audio/video cable to connect the TV audio/video output interface to another monitor to
watch the TV programs synchronously.
The SPDIF audio output interface can transmit digital audio signal instead of traditional
analog signal via optical fiber and thus achieve a better sound effect. Please use the optical fiber
connection cable to connect it to the device with a SPDIF digital input interface, like your audio
power amplifier.
Earphone jack: when you insert the earphone into the earphone jack, there will be no sound
from the TV speaker.(Please adjust the volume to a suitable
, to avoid sounds excessive
to affect the hearing.)
Use the HDMI digital signal cable (optional) to connect the external HDMI high-definition signal
source to the HDMI digital input interface on the
TV. Press SOURCE to select the signal source
HDMI .
gna
SPDIF-OUT:
sound level
SERVICE: USB interface (It's used only for software upgrade).
HDMI Digital Interface Connection
Video 1/Video 2 Signal Connection
S-VIDEO nput onnection I C
YPbPr/YCbCr Input Interface Connection
AV Output Connection
W
R
Y
Earphone jack
USB interface
Digital audio output
R Red (AUDIO-R)
W White(AUDIO-L)
Y Yellow (VIDEO)
AV Device
(like DVD, VCR, Game Console...)