Curtis RLC3257B - Manual (Page 18)

32 / 37 / 40 / 42 / 47 T7系列共用 中性英文说明书(美洲ATSC )(MSD 318方案)
General Operating Instructions
H-Position
V-Position
Clock
Phase
Auto Move the screen to left/right (range: 0-100).
Move the screen up/down (range: 0-100).
Adjust when image flashes and has vertical stripe (range: 0-100).
Reduce the water wave in line to increase image sharpness (range: 0-100).
The PC screen of the machine can adjust automatically according to the PC video signal.
H-Position
V-Position
Clock
Phase
Auto
Select Move MENU Return
50
50
50
50
VGA Settings (under VGA signal)
In VGA mode, it is necessary to select the VGA as
the signal source. If other signal source is selected,
the system menu turns into purple and becomes
unavailable.
Note: Under VGA source mode, if there is no signal
in one second, the prompt menu pops up; the device
enters power saving state after one minute and the
green indicator flashes. When VGA signals are
connected, the device will wake up and display
normally.
Note: (1). The PC screen varies according to Windows version and video card.
(2). If nonstandard video format is selected, the PC screen display will be abnormal.
1. Press [▲] or [▼] to move the cursor and select VGA menu, press [u ] or [OK] to enter the VGA
menu, and press [▲] or [▼] key to move the cursor and select desired item in the VGA menu.
2. Press [MENU] to return to previous menu, and press [EXIT] to hide the menu.
Function:
Restore Default
To restore the system default, please press [▼] to select the menu "Restore Default" and press [u
]
or [OK] to conduct the restore operation.
1. Press [MENU] to display the main menu.
2. Press [t
] or [u ] to move the cursor to select the
menu "TV", press [▼] or [OK] to enter the menu
"TV" and press [▲] and [▼] to move the cursor to
select an adjustment item.
3. When there is an icon "u
"on the screen, you can
press [u ] on the remote control or [VOL+] on the
panel to enter the next sub-menu or press [MENU]
to exit the current menu.
Antenna
Press [▲] or [▼] to select the menu "Antenna" and then press [t
] or [u ] to select Air and Cable
repeatedly.
TV
Select Move MENU Return
Antenna
Auto Scan
Favorite
Show/Hide
Channel No.
Channel Label
DTV Signal :
Air
Weak
16