Safety instruction – Curtis RLC3220 User Manual

Page 4

Don’t interfere with its proper ventilation when the TV is working or has just been unplugged, or the
display may be spoiled or life shortened due to over heating. In order to keep proper ventilation,
please allow a clearance of 10 inches on each side from the wall.
■ Don’t set any object around the ventilation openings of the appliance.
■ Don’t block the ventilation openings.
■ No inversion of the screen.
■ Don’t cover the appliance with table cloth.
■ Don’t set the appliance on carpet, bedding, or near to curtain.

SAFETY INSTRUCTION

There is high voltage subassembly inside the TV set, which may cause fire or electrical shock
during repair.

■ DO NOT remove cover ( or back ).

There will be damage if the TV drops or breaks.
■ Don’t set the TV on uneven, oblique, or shacking surface.

This appliance should not be exposed to dripping or broken. Continuous use might cause fire or
electrical shock. If the panel gets broken, please unplug the TV set, and get contact with the dealer.

Don’t Remove or Rejigger the TV Set

Set the TV on Balanced Spot

Ventilation

NO Quiver or Concussion on TV Set

Unbefitting power sources may cause fire or electrical shock. The appliance should be connected
to a power supply of the type described in the operating instructions or as marked on the appliance.

■

Power supply cord should adapt to the socket outlet.

Incorrect connection of power cord may cause fire or electrical shock.

■

Don’t touch the cord with wet hands.

■

Please check the pontes if it is clean ( no dust ) before use.

If it is not, please do the cleaning with dry and soft fabric.

■

Fix the power cord steadily in to the socket outlet to avoid it becoming flexible, or it may have

malfunction.

■

Don’t cut off the cord, for it may debase the performance. If you want to lengthen it,

please make an appropriate one or get contact with the dealer.

■

If you want to change the fuse in the connector plugs, please change it with the same

resistance and model.

Power Sources

Power Cord Connection

This appliance shall be connected to a mains socket outlet with a protective earthing connection.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet. Take care of the cord, or there might be fire or electrical shock due to broken cord.
Please make sure that the cord is not over hot, pressed, or tensed. If the cord has problem (the
core string emerges or the cord breaks), please get contact with the dealer.

Connect to Earthing Connection

■ Never allow heavy objects such as the TV set itself to be placed on the power cord. Never cover
the cord with table cloth, for it may lead you to set heavy object on the cord duo to ignorance.
■ When removing the power plug from the socket,always hold onto the plug, never pull by the cord.
■ Don’t set the cord next to heaters.
■ Don’t touch the plug right after it is unplugged to avoid electrical shock.
■ Don’t touch the plug during lightning.
■ Don’t allow cord to become knotted or tangled.
■ Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.

Dispose the Batteries Carefully

■ Incorrect disposal of batteries may cause fire or human damage, and even explosion.
■ Don’t throw batteries into fire or water.
■ Keep the batteries far away from fire or heat.
■ Keep the batteries under cool and dry environment.
■ Match the batteries to the (+) and (-) marks in the battery compartment.
■ Don’t charge up the batteries.
■ Don’t impact the batteries.
■ Please use the batteries that are appointed in the user’s manual.
■ Please treat the used batteries with the observance of the local law.

If you set the appliance under moisture or dust environment, it might cause
fire or electrical shock due to lampblack or erosive gas.
■ Don’t set the TV in kitchen, places nearby heaters, or places of lampblack and moisture.
For heat from high temperature may affect the display or other components, and cause
distortion, meltage, and fire.
■ Don’t set the TV, remote control, or other components under sun or near heaters.
■ Don’t set the TV where the difference in temperature is great.

Keep the TV Set away from Moisture and Dust