Curtis RLC3220 - Manual (Page 14)

SOUND MENU
Press MENU to display the main menu, and press ◄/► to select the Sound Menu.
Sound Mode
Treble
Bass
Balance
Auto Volume
SPDIF MODE SOUND
Standard
50
50
0
Off
PCM
MOVE MENU EXIT
SoundMode
Standard/Music/Movie/Sports/User(Only in this modeTreble and Bass can be adjusted.
Treble
Adjust the low frequency sounds.
Bass
Adjust the high frequency sounds.
Balance
Adjust the level of sound coming from the left and right speakers.
Auto Volume
Press L/R to set or cancel. When set on, it will level out the sound beingheard when sudden
changes in volume occur during commercial breaks or channel changes.
SPDIF MODE
Select the SPDIF Mode.(PCM/Off/Auto)
Adjusting the Bass/Treble/Balance
1. Select Sound Mode as User.
2. Highlighttheitem and press to display the sub-menu, then press ◄/► to adjustthe value.
PICTURE MENU
Press MENU to display the main menu, and press ◄/► to select the Picture Menu.
MOVE MENU EXIT
PICTURE
Picture Mode
Contrast
Brightness
Color
Tint
Sharpness
Color Temperature
Noise Reduction
Standard
50
50
50
50
50
Medium
Middle
Picture Mode
Highlight the item and Press ENTER or ◄/► to enter the sub-menu, that shows the picturemode
you can choose: Dynamic/Standard/Mild/User
Press PMODE on the remote control to select picture mode directly
Brightness/Contrast/Color/Tint(NTSC only)/Sharpness
Highlight the item and press ►, and a process bar appears, then press ◄/►to adjust the value.
Press MENU or EXITto hide the on-screen menu.
OSD OPERATION OSD OPERATION
24 25
Color Temperature
Select the color temperature that you feel comfortable. (Cool / Medium / Warm)
Noise Reduction
Off/Low/Middle/High You can clear up the input signal by set the item.
ENTER ENTER ENTER ENTER