EarthQuake HoLeeS-15 - Manual (Page 3)

Driver Specifications
Application / Box Design SPL Burping
8Ft.
7Ft.
5Ft.
6Ft.
4Ft.
Sensitivity/ L
Tune @ 65Hz
Tune @ 65Hz
Tune @ 65Hz
Tune @ 65Hz
Tune @ 65Hz
Cut out hole (369 ) 14 1/2" mm
Mounting depth:
14 1/4”
(361.95mm)
HoLeeS-15
Net Weight: 112 lbs
Revc: 2.000ohm
Levc: 2.3499mH
Fo: 24.1803Hz
Sd: 82.9600msqM
BL: 17.1496TM
Qms: 6.1672
Qes: 0.4120
Qts: 0.3862
No: 0.351%
SPLo: 87.4dB
Vas: 3.771CuFt
Cms: 108.6383uM/N
Mms: 398.78g
Mmd: 385.04g
Max Power: 15,000 Watts
RMS Power: 7,000 Watts
800-576-7944 www.earthquakesound.com •
Outer volume: 7.587
Inner volume: 5.4 cubic feet • Tuned @ 70Hz
Port surface: 65.6sq. inch
Port length: 7.2” (182.88mm)
Wall thickness: 1” (25.4mm)
Front baffle: 2” (50.8mm) cubic feet
30” (762mm)
23” (584.2mm)
19”
(482.6mm)
16.4” (416.56mm)
7.2”
(182.88mm)
4” (101.6mm)
DBDrag
Outer volume: 6-10
Port surface: 107.25 sq. inch
Port length: 18 1/2” (469.9mm) typically wraps around
Wall thickness: 1” (25.4mm)
Front baffle: 2” (50.8mm) cubic feet
25” (635mm)
32”
(812.88mm)
22”
(558.8mm)
20” (457.2mm)
18 1/2”
(469.9mm)
5” (127mm)
DBDrag
Port length may vary depending on frequency
Specifications are subject to change without notice.
READ
To prevent serious damage or injury call
Earthquake Tech-support before powering up
the HoLeeS subwoofer. If the subwoofer is not
wired correctly and a malfunction occurs, the
damage may void the warranty. So please help
us help you, and give us a call toll free.
Tech Support: 800•576•7944
Sound Quality
For an SQ box use the
same dimensions as the
DBDrag design below,
but use these port
dimensions.
12.3”
(312.42mm)
4”
(101.6mm)
16.4”
(416.56mm)
Port tuned @ 43Hz
Xmax: 4” Peak to Peak
Sound That Will Move You