Electrolux 65050 VI - Manual (Page 13)

Operating Instructions
13
0 1. Set the water softener manually and electronically to the desired water
hardness:
3 If the water softener is electronically set at “1” for the purpose of using
detergent that includes special salt, the special salt indicator is deacti-
vated.
Adding special salt
If you are using dishwasher detergent and special salt separately, add
the special salt:
– Before using the dishwasher for the first time.
– When the indicator for special salt
J is illuminated on the control
panel.
0 1. Open the door, remove the lower
basket.
2. Undo the lid on the salt container by
turning it anticlockwise.
3. When using for the first time:
fill the salt container with water.
4. Place the funnel supplied on the con-
tainer opening.
Fill the container with salt through
the funnel; the capacity of the con-
tainer is approx. 1.0-1.5 kg depend-
ing on the grain size. Do not overfill
the salt container with salt.
3 The water expelled by filling the salt container with salt runs out of the
salt container onto the base of the washing compartment. This is not a
cause for concern, the water will be pumped out at the start of the
next wash programme.
5. Clean any salt remnants on the container opening.
Manual
setting
Electronic
setting
Multi-display
indicator
Addition of special salt
0 1
IL
Do not add special salt.
0 - 1 2-10
2l to 10l
Addition of special salt
via salt container
(factory setting)
SALE
SAL
T
SALZ
SEL