English controls power supply – Curtis RCD4400 User Manual

Page 3

English

CONTROLS

POWER SUPPLY

Top and front panels (See )

Power Supply

Whenever convenient, use the power supply if you
want to conserve battery life. Make sure you remove
the plug from the set and wall outlet before inserting
batteries.

Batteries (not included)

Open the battery compartment and insert eight
batteries, type R-20, UM-1 or D-cells, (preferably
Alkaline) with the correct polarity as indicated by the
"+" and "–" symbols inside the compartment.

Batteries contain chemical substances, so they
should be disposed of properly.

Incorrect use of batteries can cause electrolyte
leakage and will corrode the compartment or cause
the batteries to burst. Therefore:
• Do not mix battery types: e.g. alkaline with carbon

zinc. Only use batteries of the same type for the
set.

• When inserting new batteries, do not try to mix old

batteries with the new ones.

• Remove the batteries if the set is not to be used

for a long time.

Using AC Power

1 Check if the power voltage, as shown on the type

plate located on the bottom of the set, corresponds
to your local AC power supply. If it does not,
consult your dealer or service center.

2 Connect the power cord to the AC MAINS inlet and

the wall outlet. The power supply is now
connected and ready for use.

3 To switch off completely, unplug the power cord

from the wall outlet.

• Unplug the power cord from the wall outlet to

protect your set during heavy thunderstorms.

VOLUME
- adjusts volume level.
POWER SELECTOR
- selects power on / off switch.
DBBS (Dynamic Bass Boost)
- enhances bass response.
CASSETTE RECORDER KEYS
RECORD

- starts recording.

PLAY

- starts playback.

F.FWD/REW

- fast winds / rewinds the tape

STOP/EJECT

- stops the tape;

- opens the cassette compartment.
PAUSE

- interrupts recording or playback.

IR SENSOR
- infrared sensor for remote control.
CD DOOR OPEN
- Press here to open the CD door.
FUNCTION SELECTOR (CD
- selects source of sound CD, TAPE or RADIO.
BAND SELECTOR (PUSH BUTTON)
- selects FM/AM waveband.
CD SEARCH , / TUNING UP , DOWN
CD: - skips or searches a passage / track
backwards or forward.
- tunes to radio stations.
MEMORY
CD : - programs and reviews programmed
track numbers.
Tuner: - programmes tuner stations manually.
DISPLAY
- shows the status of the system.
REPEAT / FM STEREO MONO
- repeats a track / CD / program.
- selects a FM stereo / mono.
STOP
- stops CD playback; erases a CD program.
PLAY/PAUSE / PRESET-UP
- starts or pauses CD play.
- selects a preset radio station.
TELESCOPIC ANTENNA
- to improve FM reception.
BATTERY DOOR
- to open battery compartment.
STEREO HEADPHONE JACK
- 3.5mm stereo headphone jack.
AC MAINS
- inlet for power cord.

• TAPE • RADIO)

•

4 x 2 R20 • UM1 • D-CELLS

MEMORY

STOP

ST./MO/
REPEAT

BAND

PRESET

-UP

PLL REMOTE CONTROL

SRCD4400