Curtis RCD313 - Manual (Page 11)

the selected button and normal play will resume.
REPEAT FEATURE
The CD REPEAT Button may be used to repeat a single track or repeat all tracks on a
compact disc.
Press the REPEAT BUTTON once during playback, the REPEAT indicator on LCD
Display will flash. The same track will be repeated over and over.
Press the REPEAT BUTTON a second time to repeat all tracks. The REPEAT
INDICATOR will not flash.
To cancel REPEAT PLAY, Press the REPEAT BUTTON repeatedly until the REPEAT
INDICATOR disappears.
PROGRAM FEATURE
The Program feature can be used to program up to twenty (20) tracks to play in a
selected order.
1. While in the stop mode only (CD is not playing ), press the CD PROGRAM Button,
LCD Display will show the wording “ PROGRAM 01” and “PROGRAM 01” starts to
flash.
2. Press the CD Reverse/Forward Skip (SKIP |<< or SKIP >>|) Buttons to locate the
desired track.
3. Press the CD PROGRAM BUTTON to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the CD PLAY/PAUSE
BUTTON .The track number will appear on the LCD Display and “PROGRAM” will
appear on LCD Display.
6. To hear the previous or next program track, press the CD Reverse Skip(SKIP |<<) or CD
Forward Skip(SKIP >>|) buttons, as appropriate.
Note: After all of the programmed tracks have played, the CD player will return to the
stop mode.
7. To clear the programmed tracks from memory, press STOP two times or open the CD
door in STOP mode to clear the previous programmed tracks.
FOR PRIVATE LISTENING
Connect headphone with plug 3.5mm Diameter to the phone jack. When the headphones are
connected, speakers are automatically disconnected.
Note: In case of error (such as incorrect display etc.),please unplug the AC power cord
from the outlet and remove the backup batteries. After about 1 minute, you can try again.