Curtis DVD1071 - Manual (Page 23)

19
16:9 Wide Scr
When you connect
to a wide screen TV ,
this setting will allow
the original aspect
ratio will be display
full screen.
NOTE
Depending on the DVD
disc format, e.g. 2.35:1,
the wide screen setting
may still having black
margins above and
below the picture.
Enter this menu to setup the digital audio output
format of different signal type. The selectable
output formats are PCM , All or Off
Press SETUP Button
Highlight "Audio",
Press RIGHT , Audio sub menu appears.
TV System
TV System menu is to set up the broadcast system:
AUTO
NTSC
SETUP MENU (Press SETUP button)
Audio (digital audio)
Auto switch to NTSC system according
to the disc, if not, the default system is NTSC
NTSC TV system
Highlight the desired item and press button,
Highlight the desired
Press
RIGHT
Press SETUP
item,
button to confirm.
button to save the setting and quit.
If the digital output is set in"RAW"mode.there wil Be no analog output for
DTS bitstreaml
NOTE:
Language
Video
Audio
Rating
Misc
ALL Digital Output
RIGHT
Default setting
Pas sw ord : 8888
Rating
Language
Video
Audio
Rating
Misc
Parental control 8.Aduit
Set Password
Enter Password
Language
Video
Audio
Rating
Misc
4:3 Aspect Ratio
View Mode
TV System
Video Out
Auto Fit
NTSC
S-VIDEO
1. Using the UP/DOWN direction buttons, move to the Rating.
The player`s Rating settings will appear.
2. Use the RIGHT direction buttons to skip to select the setting.
3. Use the UP/DOWN direction to change the setting.
4. Press OK for each setting to cycle through the options and
change the settings.
The following subsections explain the available options for
each of the player`s Misc setting.
Use Default Settings:
Press OK, pop up window “Use Default Setting”,
There are two selections: YES/NO.
No=Return to Use Default Setting
Yes=Close Setup menu, play disc.
Misc
Language
Video
Audio
Rating
Misc
Use Default Settings
Screen saver : On
Use Default Settings
Yes No