Curtis DVD1071 - Manual (Page 10)

AC 120V 60Hz
SYSTEM CONNECTION
Preparations
Accessories
1. Remote controller 2. Audio/Video cable 3. User's manual
(check whether be fully equipped after open the box)
Battery installation of remote controller
# Place two batteries 7 in the battery compartment. Be sure the polarities are correct. There
should be no large obstacles between the remote controller and the main unit.
System connection(Optional according to your back panel)
1. When making connection between this unit and other components, be sure all
connection with power-off.
2. Audio/Video cables are connected according to the different colour identification and
they should be fitted firmly.
Yellow to video terminal
White to audio terminal L
Red to audio terminal R
3. Scheme of connection
2.1CHANNEL CONNECTION
76
NOTE: When using component video out(Y,Pb/Cb,Pr/Cr) jack,please make sure
S-video is not connected.
TO2.1 CHANNEL INPUT
TO VIDEO INPUT
TO OPTICAL INPUT
TO COAXIAL INPUT
TO P-SCAN INPUT
TO S-VIDEO INPUT