Curtis DVD1045 - Manual (Page 12)

VIDEO
DVD 1045E
VIDEO
DVD 1045E
VIDEO
DVD 1045E
Video port setup
The DVD player is equipped with the following video ports:
Composite Video (V)
S-Video (Default option),Y/Pb/Pr.
The DVD player has been pre-set at the factory to
Composite Video (V) and S-Video outputs, as default settings.
78
After the video output set up, if the picture output is:
NOTE
Distorted ,
B
lack and white (no color),
Picture not full screen
Border part of Picture has been blocked.
It could be a result of wrong broadcast system matching
Between the player and the TV set.
Press PAL / NTSC button in STOP mode to switch
the broadcast system between PAL and NTSC.
See Function Button - PAL / NTSC switch of this manual..
Or See TROUBLE SHOOTING in this manual.
Default setting NTSC
For TV System setting
TV System menu is to set up the output TV system to PAL or
NTSC:
In STOP mode, press SETUP button
setup menu appears.
1
2
3
Highlight "TV System” selection, press ENTER Button,
sub menu appears.
Highlight "NTSC" or "PAL” , “ PAL 60” or “Automatic”,press
ENTER Button.
Press SETUP button to quit.
Press RIGHT button , highlight "Video" icon.
Press ENTER button , sub-menu appears.
4
5
6
When a DVD disc of NOT Correct format (region code) is
loaded, the player Will not accept the disc and message
"INCORRECT REGION CODE" will be displayed on screen.
When a DVD disc of NOT correct TV system is loaded or
the TV set of NOT correct TV system with the player,
a distorted video signal may come out on the screen.
GETTING ST ARTED
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ... ... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ... ... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ... ... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ... Language Video Audio Rating
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ... ... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ... ... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ... ... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
... ... ...
TV Shape
TV System
video output
4:3 LB
NTSC
s-video NTSC
PAL PAL 60
Language Video Audio Rating
2
6 1
4 5 3
15
FUNCTION BUTTONS
1
VIDEO
First,You should press[STOP] Key
1
2
STOP
2 Press[VIDEO]key may select S-VIDEO ,YUV,
Y/Pb/Pr output. VIDEO
Return
1 In PBC on mode, when pressing “RETURN” Key to
return to the menu, thus canceling the PBC mode ,
the “RETURN” key will be invalid
1
RETURN
YUV:Choose this setting if your DVD player
is connected to a TV with Y,Pb,Pr video cable.
S-VIDEO:Choose this setting if your DVD player is
connected to the TV with S-video cable.
Y/Pb/Pr:Choose this setting if your DVD player is
connected to a progressive scan TV with Y,
Pb,Pr video cables.
Automatic
Note:If TV at the AV input state,the DVD is setup at Y/Pb/Pr state,but there is no AV output,
please open the disc tray and press the video on the remote control untill the image display
on the screen.