EMTEC Electronics INTUIX H380 User Manual
Page 21
- 18 -
b. Release
S key.
c. Using
the
Up/Down keys, navigate to “System Setup”. Press and release OK key. “Vol/Mute
Control Setup” is displayed.
d.
Press and release OK key. “Set All Vol. to 1 Mode” is displayed.
e. Using
the
Up/Down keys, navigate to “Set Vol. for one Mode”. Press and release the OK key.
“Set All Vol. to Mode?” is displayed.
f.
Press and release desired Mode key (TV, VCR, DVD, etc.) to be disabled for Volume/Mute
punch-through control.
g.
“Please Wait” will be displayed briefly followed by “Success” and the remote will exit Setup
routine and return to normal operation.
h.
The chosen Mode will now use its own Volume/Mute control.
6.1.3 Vol/Mute Control Reset
This routine will reset Volume/Mute control back to its Factory default settings.
a.
Press and hold S key until “Code Setup” is displayed (takes approximately 3 seconds).
b. Release
S key.
c. Using
the
Up/Down keys, navigate to “System Setup”. Press and release OK key. “Vol/Mute
Control Setup” is displayed.
d.
Press and release OK key. “Set All Vol. to 1 Mode” is displayed.
e. Using
the
Up/Down keys, navigate to “Vol/Mute Control Reset”. Press and release the OK key.
f.
“Confirm OK to Reset” is displayed. Press and release the OK key.
g.
“Please Wait” will be displayed briefly followed by “Success” and the remote will exit Setup
routine and return to normal operation.
h.
Volume/Mute control is now rest to its Factory default settings.
6.2 Time Setup
To set the Time of day for normal LCD time display.
a.
Press and hold S key until “Code Setup” is displayed (takes approximately 3 seconds).
b. Release
S key.
c. Using
the
Up/Down keys, navigate to “System Setup”. Press and release OK key. “Vol/Mute
Control Setup” is displayed.
d. Using
the
Up/Down keys, navigate to “Time Setup”. Press and release the OK key.
e.
The “Time?” screen is displayed showing current format (12 or 24 hour) flashing and current
time. Use the Up/Down keys to set the format (12Hr or 24Hr) then press and release the OK
key.
f.
The “hours” will be flashing. Use the Up/Down keys to set the hours then press and release the
OK key.
g. The
“minutes”
will
be flashing. Use the Up/Down keys to set the minutes then press and
release the OK key. “Success” will be displayed and the remote will remain in Setup routine,
returning to the “Code Setup” screen.
6.3 Date Setup
To set the Month, Date and Day.
a.
Press and hold S key until “Code Setup” is displayed (takes approximately 2-3 seconds).
b. Release
S key.
c. Using
the
Up/Down keys, navigate to “System Setup”. Press and release OK key. “Vol/Mute
Control Setup” is displayed.
d. Using
the
Up/Down keys, navigate to “Date Setup”. Press and release the OK key.
e.
The “Year?” screen is displayed with the last 2 year digits flashing. Use the Up/Down keys to
set the Year then press and release the OK key.
f.
The “Month?” screen is displayed with the Month digits flashing. Use the Up/Down keys to set
the Month then press and release the OK key.
g.
The “Date?” screen is displayed with the Date digits flashing. Use the Up/Down keys to set the
Date then press and release the OK key.
h.
The “Day?” screen is displayed with the Day flashing. Use the Up/Down keys to set the Day
then press and release the OK key.
i.
“Success” will be displayed and the remote will remain in Setup, returning to the “Code Setup”
screen.
6.4 Backlight Setup
To set the length of time the Backlighting remains on after a keypress.
a.
Press and hold S key until “Code Setup” is displayed (takes approximately 3 seconds).
b. Release
S key.
c. Using
the
Up/Down keys, navigate to “System Setup”. Press and release OK key. “Vol/Mute
Control Setup” is displayed.
d. Using
the
Up/Down keys, navigate to “Backlight Setup”. Press and release the OK key.
e.
The “Backlight Time?” screen is displayed with the current Backlight On time digits flashing. Use
the Up/Down keys to set the Backlight On time in increments of 5 seconds up to a maximum of
60 seconds. The default Backlight On time is 10 seconds. To turn the Backlighting feature off,
set the time to “00” (zero). Press and release the OK key.
f.
“Success” will be displayed and the remote will remain in Setup routine, returning to the “Code
Setup” screen.
6.5 Language Setup
To set the remote display language.
a.
Press and hold S key until “Code Setup” is displayed (takes approximately 2-3 seconds).
b. Release
S key.