Parkside PNTS 1300 C3 - Manual (Page 5)

5
GB
Application
The appliance is intended for domestic wet
and dry vacuuming in, for example, the
house, work room, car or garage. The ap-
pliance can also be used as a blower or to
suction up water. This equipment is not suit-
able for commercial use.
Vacuuming of flammable or explosive mate-
rials or those which endanger health is pro-
hibited. The manufacturer will not be held
responsible for injuries resulting from use
which does not comply with the directions,
or from incorrect use.
General description
The illustration of the principal func-
tioning parts can be found on the
front and back foldout pages.
Contents
Unpack the appliance and check that it is
complete. The appliance is supplied with the
motor head fitted ( 1). To remove the mo-
tor head, open the securing clips ( 10).
Dispose of the packaging material properly.
1 Motor housing
2 Carrying handle
6 Waste container
7 4 feet with castors and accessory
fittings
9a Cable clip
12 3-part vacuum tube
13 Vacuum hose with handle
15 Foam filter
16 Material filter (already mounted)
17 Paper filter bag
18 Floor nozzle with
20 Crevice nozzle
6 cross-head screws
Instruction Manual
Overview
Housing
1 Motor housing
2 Carrying handle
3 On/off switch
4 4 attachment ports for accesso-
ries
5 Suction connection
6 Waste container
7 4 feet with castors and acces-
sory fittings
8 Cable holder
9 Mains cable
9a Cable clip
10 2 locking clips
11 Blower connection
Accessories
12 3-part vacuum tube
13 Vacuum hose with
14 Handle component
Filter
15 Foam filter for wet vacuuming
16 Material filter for dry vacuuming
(already mounted)
17 Paper filter bag to vacuum
coarse dirt
Nozzles
18 Floor nozzle with
19 Turnable insert attachment
with brush and rubber lip, for
vacuuming carpets and smooth
surfaces
20 Crevice nozzle
21 Filter basket
22 Flaps on the paper filter bag
23 Intake connections
24 Sealing ring
25 Lip on the suction pipe