Parkside PHD 150 D3 - Manual (Page 44)

44
GB MT
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a final inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Areas of Application
Only use the pressure cleaner in the follow-
ing private home areas:
• This equipment is not suitable for com-
mercial use.
Commercial use will invalidate the
guarantee.
• To clean machines, vehicles, buildings,
work tools, facades, terraces, gardening
tools, etc. with a high-pressure water jet.
• Only use with original accessories and
spares.
• Cleaning the object according to its
manufacturer’s information.
• The rotating wash brush is fundamentally
not suitable for sensitive and painted
surfaces (e.g. automotive paint).
Content
Introduction ...............................44
Areas of Application ..................44
General Description ....................45
Scope of Delivery...........................45
Functional description .....................45
Overview ......................................45
Technical data ............................45
Notes on Safety .........................46
Explanation of symbols ...................46
Symbols in the manual ....................47
General notes on safety ..................47
Start-up .....................................48
Setting up .....................................49
Mains connection ...........................49
Operation .....................................49
High-pressure / low-pressure
operation ......................................50
Interrupting operation .....................51
Ending operation ...........................51
Using detergents ............................51
Cleaning and Maintenance .........52
Cleaning .......................................52
Maintenance .................................52
Storage ..................................52
Waste Disposal and
Environmental Protection ...........52
Guarantee .................................53
Repair Service ............................54
Service-Center ............................54
Importer ....................................54
Spare Parts Order ......................54
Trouble shooting ........................55
Translation of the original EC
declaration of conformity ............ 75