Parkside PAMFW 10.8 A1 - Manual (Page 41)

41 GB/MT
Start-up
Checking the battery charge
When the device is on, the battery status indicator 2
indicates the status or the remaining power as follows:
RED / ORANGE / GREEN = maximum
charge / power
RED / ORANGE = medium charge / power
RED = low charge – recharge battery
Selecting the application tool
note: The universal system with easy tool change
fits common accessories.
HCS plunge saw blade 95 x 32 mm
Materials:
Wood, plastic, plaster and other soft materials
Use:
· Cut-off and plunge saw cuts
· sawing close to the edge, even in hard to reach
areas
Example: cutting notches in light construction walls.
(see Fig. A and B)
Diamond saw blade
Material:
Tile cement, Tile joints
Use:
· Removing material residue, for example tile
cement when replacing damaged tiles
· Reaming out joint compound between wall and
floor tiles (see Fig. C)
Scraper
Materials: Motor / cement residue, tile / carpet
adhesive, paint / silicone residue
Use:
· Removing material residue, for example carpet
adhesive residue on floors (see Fig. D)
Grinding plate
Materials:
Wood and metal (sanding sheets included),
paint*, stone*
*depending on sanding sheet
Use:
· Sanding edges and hard to reach areas
(see Fig. E and F)
Attach sanding sheet
to grinding plate
Centre the sanding sheet 15 on the grinding
plate 14 .
Start-up General safety advice for electrical power tools / Before use