Parkside PAMFW 10.8 A1 - Manual (Page 36)

36 GB/MT
Cordless Multi-Purpose Tool
PAMFW 10.8 A1
Q Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Q Proper use
The device is intended for sawing, cutting and sand-
ing. The preferred materials on which the device can
be used are: Wood, plastic, drywall elements, light-
and non-ferrous metals, fasteners (e.g. nails, screws),
and wall tiles. It is particularly suitable for working
close to edges and precise work. Any other use or
modification to the device shall be considered as
improper use and could give rise to considerable
dangers. Not for commercial applications.
Features
1 ON / OFF switch
2 Battery status indicator
3 Adjusting wheel oscillation speed preset
4 Louvres
5 Tool light
6 Safety washer
7 Clamping bolt
8 Unlock keys
9 Rechargeable battery pack
10 Allen key
11 Scraper 79 x 52 mm
12 Diamond saw blade 65 mm
13 HCS plunge saw blade 95 x 32 mm
14 Grinding plate
15 Sanding sheets
16 Rapid charger
17 Status LED
18 Charge indicator LED
Scope of delivery
1 Cordless Multi-Purpose Tool PAMFW 10.8 A1
1 Rechargeable battery pack
1 Rapid charger
1 Triangular grinding plate
6 Sanding sheets 80 mm flange size
1 Scraper 79 x 52 mm
1 HCS plunge saw blade 95 x 32 mm
1 Diamond saw blade 65 mm
1 Hexagonal key
1 Carrying case
1 Operating instructions
Technical data
Cordless Multi-Purpose Tool PAMFW 10.8 A1:
Rated voltage:
10.8 V
Speed control electronics: 5000–19000 rpm
Oscillation angle:
3.2°
rechargeable Battery Pack PAMFW
10.8 A1-1:
Type: LITHIUM-ION
Rated voltage:
10.8 V
Capacity: 1500 mAh
rapid Charger PAMFW 10.8 A1-2:
Input:
Rated voltage:
100–240 V∼ 50–60 Hz
Rated input: 32 W
Output:
Rated voltage:
12.6 V
Charging current: 1800 mA
Charging time: approx. 60 min
Protection class: II /
Introduction / General safety advice for electrical power tools Introduction