Parkside PEXS 270 A1 - Manual (Page 33)

33 GB/MT
empty the dust container before taking a break
from work. Grinding dust in the dust sack, mi-
crofilter, paper sack (or in the filter sack or filter
of the vacuum cleaner) can ignite automatically
under unfavour-able conditions such as flying
sparks when metal is being ground. There is a
par-ticular hazard if the grinding dust is mixed
with paint or polyurethane residues or other
chemical substances and the material being
ground is hot after being worked on for a pro-
longed period.
When working for extended periods
on wood and, in particular, materials
that produce dusts that are hazardous
to health, connect the appliance to an
appropriate external suction device.
Provide for sufficient ventilation when
working plastics, varnishes and paints.
The electric tool must only be used for
dry grinding. The penetration of water into
the electric device increases the risk of an elec-
tric shock.
Introduce the appliance to the work
piece with it switched on. On task com-
pletion, lift the appliance from the work piece
and then switch it off.
Permit the switched off appliance to
come to a complete standstill before
putting it down.
The appliance must always be kept
clean, dry and free of oil or grease.
Keep your workplace clean. Material
mixtures are particularly dangerous. Light metal
dust can burn or explode.
Q
Original accessories / tools
Use only the accessories detailed in
the operating instructions. The use of
inserted tools or accessories other than those
recommended in the operating instructions
could lead to you suffering an injury.
Q
Before use
Q
Selecting the Grinding Disc
Metal Removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
Please note that corresponding grinding discs
with different grain sizes should be used for pro-
cessing different materials.
Q
Changing sanding sheets
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
Lift the grinding disc 5 at the side and pull it off
from the backing pad 4 in order to remove it.
Note: Before securing a new sanding sheet 5 ,
remove all dust and dirt from the sander plate 4 .
Ensure that the openings in the sanding sheet 5
concur with the boreholes of the sanding plate 4 .
Q
Dust / Swarf Removal by Suction
Please note the “Safety instructions” section.
Removal by Suction with Dust Collector:
Push the dust collector 3 completely onto the
device.
In order to empty the dust collector 3 pull it off
the device.
Note: Empty the dust collector 3 in good time
and regularly in order to ensure the optimum
removal of dust by suction.
External Exhaust Suction (see Illustration A):
Connection:
Push the adapter for external exhaust suction 7
on to the exhaust nozzle 6 and turn it clockwise
to fix it in place. If necessary, use the reducing
piece
8 by pushing it into the adapter for
external exhaust suction 7 .
Push the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
General power tool safety warnings / Before use