beautypg.com

Gb mt – Parkside PHD 100 D2 User Manual

Page 44

background image

44

GB MT

Warning ! To ensure machine safety,

use only original replacement parts

from the manufacturer or replacement

parts authorised by the manufacturer.

Electrical safety:

Caution: to avoid accidents and

injuries from electric shocks:

Warning ! The plug and socket of an

extension cable must be water-tight!

Warning ! Unsuitable extension

cables can be dangerous as peo-

ple can be harmed by an electric

shock!

• Protect the electric plug connections

against moisture.

• If there is a risk of flooding, fix the

plug connections in an area that is safe

from flooding.

• Ensure that the mains voltage matches

the specifications on the rating plate.

• The electrical installation shall be ac-

cording to national wiring rules.

• The electric supply connection shall be

made by a qualified electrician and

comply with IEC 60364-1.

• It is recommended that the electric

supply to this machine should include

either a residual current device that

will interrupt the supply if the leakage

current to earth exceeds 30 mA for 30

ms or a device that will prove the earth

circuit.

• Before each use, check the equipment,

cable and plug for damage.

• If the power cable for this equipment is

damaged, it must be replaced by the

manufacturer, a customer service agent

of the same or a similarly qualified per-

son in order to prevent hazards.

Warning ! Do not work with dam-

aged or incomplete equipment, or with

equipment that has been converted

without the approval of the manufac-

turer. Before initial operation, have a

specialist check that the required elec-

trical protection measures are in place.

Warning ! Never operate the pres-

sure washer if the power supply cable

or other important parts, such as the

high-pressure hose or the gun, are

damaged.

• Protect the pressure washer from frost

and dry running.

• Use only original accessories and do

not carry out conversion work on the

equipment.

• Please read the notes in the operating

instructions on the topic of “mainte-

nance and cleaning”. Any measures

above and beyond these, particularly

opening the equipment, are to be car-

ried out by an electrician. In the case

of repairs, always contact our service

centre.

Warning ! The washer was designed

for operation with a neutral detergent

based on a biologically decomposable

anionic tenside. Other detergents or

chemical substances could impair the

safety of the washer and damage it.

• If you come into contact with cleaning

agents, rinse with plenty of clean wa-

ter.

Warning ! Water that has passed

through a backflow preventer is classi-

fied as undrinkable.

Warning ! High-pressure hoses, fit-

tings and couplings are important for

machine safety. Use only high-pressure

hoses, fittings and couplings recom-

mended by the manufacturer.