Parkside PDNE 4000 A1 - Manual (Page 11)

11 GB
… / Cleaning and Care / Information about warranty and service processing
Via in-line oiler
Install an in-line oiler directly adjacent to the tool
(approx. 50 cm clearance) to adequately supply
the tool with oil.
Manually
Add 3–5 drops of speciality tool oil to the compressed
air connection before every use. If the compressed
air tool is not being used for several days, add 5–10
drops of oil to the compressed air connection before
switching it on.
Always store your compressed air tools in dry
rooms.
With frequent use and high contamination, main-
tenance should be performed every 30 min. The
equipment should always be lubricated in the
process
Verify the speed and the noise level after every
use.
Regularly check the speed.
ATTENTION! Clean the appliance before main-
tenance from all dangerous substances which
(due to work processes) may have accumulated
on the appliance. Avoid all skin contact with
these substances.
REMARK! The skin coming into contact with
dangerous dust may result in severe dermatitis.
If dust is produced or dispersed during the main-
tenance work, it can be inhaled.
Cleaning and Care
Never clean with liquids such as petrol, solvents
or water.
Do not allow liquids to enter the tool.
Only clean the tool with a dry cloth.
Information about warranty
and service processing
Creative Marketing Consulting
GmbH warranty
Dear customer,
the warranty for this device is 3 years from the date
of purchase. In the event of product defects, you
have legal rights against the retailer of this product.
Your statutory rights are not limited in any way by
our warranty detailed below.
Warranty terms
The warranty period begins on the date of purchase.
Please retain the original receipt safely. This document
is required as your proof of purchase.
Should this device show any fault in materials or
manufacture within three years from date of purchase,
it will be repaired or replaced - at our choice - by
us free of charge. This warranty is conditional on the
defective device and the receipt of purchase being
presented within the three year warranty period,
and that there is a brief written description of the
nature of the defect and of the date it arose.
If the defect is covered by our warranty, we will re-
turn the repaired device or replacement thereof. A
repair or exchange of the device does not extend
a new warranty period.
Extent of warranty
The appliance has been manufactured to strict qua-
lity guidelines and meticulously examined before
delivery.
The warranty applies to faults in material or manu-
facture. This warranty does not apply to product
parts subject to normal wear and tear and which
can therefore be considered as wear items, or to
damage to fragile parts, e.g. switches, storage bat-
teries or glass parts.
This warranty becomes void if the device has been
damaged or improperly used or maintained. All in-
structions provided in the instructions for use must
be followed strictly to constitute proper use of the
product. Purposes and practices which the opera-
ting instructions warn of or advise against must be
avoided without fail.
This product is intended for private, non-commercial
use only. Any incorrect or improper use of the device,
… / Before use / Start-up / After initial use / Changing spare parts / Maintenance
43098_par_Druckluft-Nadelentroster PDNE 4000 A1_content_CZ.indd 11 04.06.14 13:17