Parkside PLEM 50 A1 User Manual
Page 21

GB
18
PLEM 50 A1
Faults
Possible cause
Rectifi cation
156
Received signal too
strong
Avoid highly refl ective or mirrored
surfaces
Find a measurement point that is
less refl ective
157
Measurement er-
rors or surface too
bright
Darken the measuring surface or
fi nd another surface
160
Vibrations too
strong
Hold the device still
Hardware failure
If the icon appears despite repeat-
ed switching on and off , contact
the Customer Service Hotline.
NOTE
►
If you cannot solve the problem with the aforementioned solu-
tions, please contact the Service Hotline (see chapter
Service).
IB_100719_PLEM50A1_LB4.indb 18
28.08.14 11:01
See also other documents in the category Parkside Tools:
- X3 (12 pages)
- PHP 500 A1 (10 pages)
- PHP 500 A1 (46 pages)
- PWS 125 A1 (108 pages)
- PWS 125 A1 (82 pages)
- PWS 230 A1 (101 pages)
- PWS 125 A1 (51 pages)
- PWS 125 A1 (85 pages)
- PWS 230 A1 (45 pages)
- PWS 125 A1 (67 pages)
- PWS 125 A1 (113 pages)
- PWS 125 A1 (51 pages)
- PWS 125 A1 (51 pages)
- PWS 230 A1 (108 pages)
- PWS 125 A1 (82 pages)
- PWS 230 A1 (79 pages)
- PWS 125 A1 (67 pages)
- PWS 125 A1 (67 pages)
- PWS 230 A1 (105 pages)
- PABS10.8-LI (84 pages)
- PLS 30 (19 pages)
- PHLG 2000-2 (44 pages)
- PHLG600 (35 pages)
- PHLG 2000 B1 (61 pages)
- PHLG 2000-2 (11 pages)
- PHLG 2000-2 (12 pages)
- PABS 18 A1 (61 pages)
- PABS 18 A1 (79 pages)
- PFSP 100 (64 pages)
- PFSPS150 (65 pages)
- PABS 10.8 A1 (55 pages)
- PABS 10.8 A1 (75 pages)
- PDS 200 A (10 pages)
- PAS 3.6 A1 (43 pages)
- PAS 3.6 A1 (42 pages)
- PAS 3.6 A1 (33 pages)
- PAS 3.6 A1 (58 pages)
- PAS 3.6 A1 (52 pages)
- PAS 3.6 A1 (66 pages)
- PLBS 30 A1 (89 pages)
- PLBS 30 A1 (121 pages)
- PET 25 A1 (44 pages)
- PET 25 A1 (60 pages)
- PET 25 A1 (37 pages)
- PET 25 A1 (37 pages)