Pneumatic water sprayer pdws 8 a1 introduction, Intended use, Features and fittings – Parkside PDWS 8 A1 User Manual
Page 30: Technical data
30 GB/MT
Introduction / General safety instructions for air tools
Introduction
Pneumatic water sprayer
PDWS 8 A1
Introduction
Congratulations!
You have chosen high-quality device by our company.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Initial operation of this tool must be performed
by trained personnel.
KEEP OUT OF THE REACH OF CHILDREN!
Intended use
The pneumatically operated water jet is suited to the
generation of a high-pressure water jet of variable
intensity. Keep these instructions in a safe place.
When passing this product on to others please also
include all documents. Any use other than the in-
tended is prohibited and potentially dangerous.
Damages resulting from noncompliance or misuse
are not covered by the warranty and are not in-
cluded in the manufacturer‘s liability. This device
has been designed for household use and may not
be used for commercial or industrial purposes.
Features and Fittings
Check that all the items are present and
that the device is in perfect condition im-
mediately after unpacking. Do not use
the device if it is defective.
1
Compressed air connection (for plug-in nipple ¼“)
2
Extractor
3
Water connection
4
Flow control
Technical data
Air consumption:
approx. 350 l / min
Operating pressure:
2–9 bar
Max. operating pressure:
9 bar
Compressed air connection: ¼“ (6.35 mm) NPT
Weight:
approx. 290 g
Air supply:
via maintenance unit
with filter pressure re-
ducer
Required air quality:
purified, condensa-
tion-free
Compressors:
with min. 50 l tank
volume
Max. water temperature:
30 °C
Water pressure:
max. 5 bar
Flow:
3–4.5 l / min
The following pictograms are used in these operating instructions / on the device:
Note
Wear hearing protection, dust protection
mask, protective glasses and protective
gloves.
Observe caution and safety notes!
Supply hose
Risk of explosion!
Dispose of packaging and device in
an environmentally friendly way!
Never use hydrogen, oxygen, carbon
dioxide or other bottled gasses as an
energy source.
89574_par_Druckluft Wasserstrahler PDWS 8 A1_Content_LB5.indd 30
19.04.13 11:17