Parkside PKS 1700 B2 - Manual (Page 60)

GB/MT
- 60 -
1. Introduction
Congratulations on your new purchase.
You have decided in favor of a high-quality pro-
duct. The operating instructions are a part of this
product. They contain information of importance
for your safety, for the use of the product and for
its disposal. Before you use the product, acquaint
yourself with all the information concerning its
operation and safety. Use the product only as
described and only for the listed areas of applica-
tion. If you hand on the product to other people,
give them all the documentation as well.
2. Safety regulations
ƽ
Caution!
Read all safety regulations and instruc-
tions.
Any errors made in following the safety regu-
lations and instructions may result in an electric
shock, fi re and/or serious injury.
Keep all safety regulations and instruc-
tions in a safe place for future use.
2.1 General safety information on electric
power tools
Warning! When using electric tools, basic
safety precautions should always be fol-
lowed to reduce the risk of fi re, electric
shock and personal injury, including
the following. Read all these instructions
before attempting to operate this product
and safe these instructions.
•
Keep work area clean
– Cluttered areas and benches invite injuries.
•
Consider work area environment
– Don‘t expose power tools to rain. Don‘t use
power tools in damp or wet locations. Keep
work area well lit. Don‘t use power tools in
presence of flammable liquids or gases.
•
Guard against electric shock
– Prevent body contact with grounded sur-
faces (e.g. pipes, radiators, ranges refrigera-
tiors).
•
Keep children away
– Do not let visitors contact tool or extension
cord. All visitors should be kept away from
work area.
•
Store idle tools
– When not is use, tools should be stored
in dry, high, or locked-up place, out of the
reach of children.
•
Don‘t force tool
– It will do the job better and safer at the rate
for which it was intended.
•
Use right tool
– Don‘t force small tools or attachments
to do the job of heavy duty tool. Don‘t use
tools for purposes not intended: for example,
don‘t use circular saw for cutt- ing tree limbs
or logs.
•
Dress properly
– Do not wear loose clothing or jewelry.
They can be caught in moving parts. Nonskid
footwear is recommended when working
outdoors. Wear protective hair covering to
contain long hair.
•
Use safety glasses
– Also use face or dust mask if cutting opera-
tion is dusty.
•
Don‘t abuse cord
– Never carry tool by cord or yank it to dis-
connect it from receptacle. Keep cord from
heat, oil and sharp edges.
•
Secure work
– Use clamps or a vise to hold work. It‘s safer
than using your hand and it frees both hands
to operate tool.
•
Don‘t overreach
– Keep proper footing and balance at all
times.
•
Maintain tools with care
– Keep tools sharp and clean for better and
safer performance. Follow instructions for
lubricating and changing accessories. Inspect
tool cords periodically and, if damaged, have
repaired by authorized service facility. Inspect
extension cords periodically and replace if
damaged. Keep handles dry, clean and free
from oil and grease.
•
Disconnect tools
– When not in use, before servicing, and
Anl_4300689.indb 60 Anl_4300689.indb 60 10.10.12 18:58 10.10.12 18:58