Parkside Pipe Cleaning Set - Manual (Page 10)

10
GB MT
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended purpose
The pipe cleaning set clears blockages
from pipes, down pipes, drains and toilets.
The equipment is intended for use with the
Parkside pressure washers PHD 100 A1,
PHD 100 B2, PHD 100 C2, PHD 150,
PHD 150 A1, PHD 150 B2, PHD 150 C2
Operating pressure (Rated pressure) max.
110 bar. The equipment is suitable for the
following pipes:
- Curve C no more than 90°;
- Diameter D at least 40 mm;
- Radius R at least 70 mm.
min
D = 40mm
min
R = 70mm
K = 90°
max
The equipment is not intended for commer-
cial use.
The operator or user is responsible for ac-
cidents or damages to other people or their
property.
The manufacturer is not liable for damages
caused by use other than for the intended
purpose or improper operation.
Functional description
The pipe cleaning set comprises a nozzle
head and a 15 m long, flexible hose,
which can be connected to a pressure
washer. The hose is moved through the
pipe by the four high-pressure jets that are
directed backwards and the blockage is
released by the water jet.
See the front fold-out page for
illustrations.
Overview
1 Pipe cleaning set
2 Marking ring
3 Pipe cleaning hose
4 Connecting piece
5 Nozzle head
6 Scale
7 Red safety marking
8 Pressure washer jet gun (sold
separately)
Technical specifications
High-pressure hose
Intake temperature .................. max. 60°C
Length ....................................... 15 m
Use the product only as described
and for the applications specified: