Emerson TURBO HD7003 - Manual (Page 6)

5
You may also purchase a “Universal” type AC adapter that allows you to select the
desired output voltage, and normally includes several of the most popular plug
sizes. Make sure that the adapter you purchase is “UL Listed”. Look for the “UL”
mark on the packaging and on the adapter itself.
Connect the adapter housing directly to a 120V AC outlet. Connect the appropriate
adapter plug to the “DC Input 4.5V” jack on the side of the CD player. Remove the
rubber cap from the Input jack before connecting the adapter plug. Replace the
rubber cap when the adapter plug is removed from the player.
Notes:
• The housing of the adapter may become warm during operation. This
is normal.
• Never insert or remove the adapter housing from the AC outlet while
your hands are wet.
• The adapter plug must be completely disconnected from the CD player
in order to operate the player on batteries.
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent
damage or injury from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture
(Follow battery manufacturer’s directions.)
HOLD
4.5V DC
AC/DC ADAPTER
(OPTIONAL)
120V/60Hz AC OUTLET
HD7003_ib040703.p65 7/4/2003, 11:15 5