Emerson TURBO HD7003 - Manual (Page 17)

1 6
6.) After the last programmed track has played
the player stops and the display again shows
the total tracks and playing time. However the
programmed sequence remain in the memory.
Press the PROG button, then the PLAY/PAUSE button to play the
programmed sequence again.
7.) To erase the programmed sequence from the memory press STOP button
at stop mode, or open the CD door.
PROGRAMMED REPEAT PLAYBACK
You may use the Program and Repeat Playback functions together to continuously
repeat a programmed sequence of tracks. Follow steps 1 through 5 above to
begin programmed playback and then press the
P-MODE button twice until the Repeat ALL (
ALL) indicators appear in the display. The
programmed sequence will be repeated
continuously.
ANTI- SHOCK
PROG
ALL
ANTI- SHOCK
HD7003_ib040703.p65 7/4/2003, 11:15 16