Parkside PNTS 1300 B2 - Manual (Page 39)

39
GB
of the included paper filter bag (see
“Replacement parts/Accessories”).
Blowing
To blow, plug the suction hose (13) onto
the connection (10) on the motor head.
Cleaning/Maintenance
Pull out the mains plug.
This will prevent danger of injury
from electric shock.
Always check the appliance before
use for any obvious faults such as
a defective mains cable, and have
these repaired or replaced.
Cleaning the appliance
Never hose the appliance
down with water. Never use
aggressive cleaning agents
or solvents. This could dam-
age the appliance.
• After use, empty the waste tank ( 6).
• Clean the waste tank with a damp cloth.
• Wash the foam filter ( 15) with luke-
warm water and soap, and allow to
dry. If necessary, wash with lukewarm
water and soap and allow to dry.
• Beat out the material filter ( 16).
• Replace the paper filter bag ( 17)
when full (see “Replacement parts/Ac-
cessories” for reordering)
Storage
- To store, wind the mains cable
(8) around the cable holder
(11a) on the carrying handle
(2). Use the cable holder (11b)
to fix the mains plug onto the
back of the equipment.
- Insert the separated vacuum
tubes (12) into the accessory
holder on the appliance feet (7).
- The attachment ports on the mo-
tor part serve as nozzle storage
( 4) or on the feets (7).
- Store the appliance in a dry
place and out of reach of chil-
dren.
Disposal/Environmental
protection
Be environmentally friendly. Return the
tool, accessories and packaging to a recy-
cling centre when you have finished with
them.
Machines must not be disposed of
with household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on
for recycling. Contact our Service Centre
for more details.
Defective units returned to us will be dis-
posed of for free.