Technical specifications, Initial operation, Guarantee – Parkside High-Pressure Extension Hose User Manual
Page 5: Gb mt
1 High pressure connection
on the equipment hose
2 High pressure connection
on the gun side
3 Adapter for high pressure connection
on the gun side
4 Adapter for high pressure connection
on the equipment hose
Also observe the safety instruction
for your pressure washer.
Pressure washers can be dan-
gerous if used incorrectly. Do
not direct the jet at people, ani-
mals, live electrical equipment or the
equipment itself.
Technical specifications
High-pressure hose
Length................................................. 6 m
Max. pressure ................160 bar / 16 MPa
Intake temperature ......max. 60°C / 140°F
Initial Operation
Screw the high pressure connection on
the equipment hose (1) to the high pres-
sure hose of your pressure washer.
Screw the high pressure connection on
the gun side (2) to the spray gun of your
pressure washer.
The high pressure extension hose is an
accessory for PHD 150 A1. For use with
another device, the enclosed adapters 3
and 4 may be helpful.
Be aware of the increased risk of
tripping when using your pressure
washer with the high pressure ex-
tension hose.
Do not run over, squash or crease
the high pressure extension hose.
There is a risk of damage and the-
refore injury to you.
• Store the equipment in a frost-proof
room.
Guarantee
• The product is not suitable for commer-
cial or professional use.
• Justified guarantee claims should be
reported to our Service Centre (see
cover page for telephone & fax no.s,
and email address). Our Service Team
will tell you more about our complaints
handling procedure.
• Damage due to natural wear and tear,
overload or incorrect use is excluded
from the guarantee.
• Furthermore, the prerequisite for guar-
antee services is that the references
indicated in the operating instructions
regarding cleaning and maintenance
have been adhered to.
• Damage, which has been caused from
material or manufacturing faults, will be
made good free of charge, by replace-
ment delivery or repair.
This requires that the appliance is re-
turned to our service center undisman-
tled and with proof of purchase and
guarantee.
• Devices sent in freight collect - by bulk
freight, express or with other special
freight - are not accepted.
• Defective units returned to us will be
disposed of for free.
GB MT