beautypg.com

Parkside PHD 100 B2 User Manual

Page 9

background image

9

GB

• Establish the water supply by

connecting the rapid-action wa-

ter supply connector to the water

connection with sieve insert (8).

C

• Connect to the spray gun (10)

by inserting and screwing in the

jet tube (11).

• If the jet pipe (11) is fitted, screw

in with the jet pipe (11) to con-

nect either the adjustable fan

nozzle (12) or the high pressure

nozzle (13).

Screw in to connect the deter-

gent container with nozzle (14)

directly to the spray gun (10).

With using the cleaning agent

container with the nozzle (

A

14), pour only cleaning agent

into the container. It is sucked in

automatically.

The width of the jet can be increased by

turning the end of the nozzle to the left. To

reduce the width of the jet, turn the end of

the nozzle to the right.

Mains connection

The pressure washer you have acquired is

already fitted with a mains plug. The pres-

sure washer must only be connected to an

earthed socket 230 V ~ 50Hz.

Only operate the pressure washer

after all the above points have been

observed.

• Ensure that the pressure washer is

turned off by its ON / OFF switch (

A

5).

• Insert the mains plug into the mains

socket

Operation

• Connect the equipment to the water

tap. Observe the regulations for the

use of a system separator.

• Turn on the water tap entirely.

Never operate the pressure washer

with a closed water tap. Dry run-

ning will damage the washer!

. Be.prepared.for.the.recoil.

force.of.the.emitted.wa-

ter.jet!.Ensure.that.you.are.

standing.firmly.and.that.you.

are.holding.the.gun.(

A

5).

securely,.otherwise.you.could.

injure.yourself.or.other.peo-

ple.

• Switch on the pressure washer with the

ON / OFF switch (

A

5).

• Pull the lever of the gun (

A

10) to turn

on the washer.

• Hold the switch-on lever of the gun

(

A

10) until there is no more air in the

pressure washer.

Releasing the lever will switch

off the washer, but the pressure

within the system is retained.

D

• Lock / unlock the switch-on lever

of the gun (10) by depressing

the locking button (17).

Lock.the.switch-on.lever.to.prevent.

the.pressure.washer.from.being.in-

advertently./.accidentally.started..

Locked

Open

This manual is related to the following products: