Parkside PDOS 200 A1 - Manual (Page 37)

37 GB/MT
to be used. If you install new grinding wheels
carry out a ringing test before use. Grinding
wheels in good condition give a clear ringing
noise when struck lightly with a plastic hammer.
1) Take off the outer part of the wheel guard
cover 7 by unscrewing the 3 threaded fixings
(see Figs. n, O).
2) Release the nut 13 by preventing the nut on the
opposite side from rotating and then remove the
outside flange
12 .
3) now replace the grinding wheel and reassem-
ble all the components in the reverse order.
Take note that the left-hand side of the double
grinding machine has a left-hand thread
11 and
the right-hand side has a right-hand thread. This
ensures that the nuts
13 can only be screwed
off in the direction of rotation of the spindle.
j Use only the supplied flanges to mount the
grinding wheels.
Note: The grinding wheels are fitted with
a ½“ adapter so that they can be used
with grinding wheels purchased later with
either a ½“, or a 20 mm bore. Grinding
wheels are available in various grit grades
and hardnesses. The central fixing holes in
grinding wheels must not be redrilled.
Q
Original accessories /
Attachments
J Use only the accessories and attach-
ments detailed in the operating instruc-
tions. The use of inserted tools or accessories
other than those recommended in the operating
instructions could lead to you suffering an injury.
Q
Maintenance and cleaning
RISK OF INjURy! Before
carrying out any tasks on the device itself and when
you are not using the device, always pull the mains
plug out of the mains socket.
The device is largely maintenance-free.
j Clean the device frequently. For best results,
clean the double grinding machine immedi-
ately after you have finished using it.
j Do not allow any liquids to enter the device.
Use a dry cloth to clean the device.
j Do not under any circumstances use petrol or
strong solvents.
j Store the device in a dry room.
Q
Service
have your device
repaired at the service centre or by
qualified specialist personnel using
original manufacturer parts only. This
will ensure that your device remains safe to use.
If the plug or lead needs
to be replaced, always have the
replacement carried out by the manu-
facturer or its service centre. This will
ensure that your device remains safe to use.
Q
Warranty
The warranty for this appliance is for 3 years
from the date of purchase. The appliance
has been manufactured with care and
meticulously examined before delivery.
Please retain your receipt as proof of pur-
chase. In the event of a warranty claim,
please make contact by telephone with
our Service Department. Only in this way
can a post-free despatch for your goods
be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile components,
e.g. buttons or batteries. This product is for private
use only and is not intended for commercial use.
The warranty is void in the case of abusive and
improper handling, use of force and internal tam-
pering not carried out by our authorized service
branch. Your statutory rights are not restricted in
any way by this warranty.
Preparing for first use / Maintenance and cleaning / Service / Warranty