Parkside PSE 2800 A1 - Manual (Page 9)

properties of the work area, other sound
sources etc., e.g. the number of machines
and other neighboring processes, and the
time span over which the user/operator is
subjected to the noise. Also, the permitted
immission level can vary from country to
country. Nevertheless, this information
makes it possible for the user to be able to
make a better assessment of the dangers
and risks involved.
Important: Use only normal, unleaded
petrol as fuel.
ƽ CAUTION
Read all the safety regulations and
instructions. Any errors made in following the
safety regulations and instructions may result in
an electric shock, fire and/or serious injury.
Keep all safety regulations and instructions
in a safe place for future use.
Explanation of the warning signs on the
equipment (Fig. 15)
1. Important. Read the operating instructions.
2. Important. Hot parts. Keep your distance.
3. Important. Switch off the engine before
refueling.
4. Important. Never operate in non-ventilated
rooms.
3. Layout (Fig. 1-5)
1 Tank indicator
2 Tank cover
3 2 x 230 V~ socket-outlets
4 Earth
connection
5 Overload cut-out
6 Voltmeter
7 Oil filler screw
8 Oil drainage screw
9 Oil shortage cut-out
10 On/Off switch
11 Choke lever
12 Reversing starter
13 Petrol cock
14 Wheels
15 Axle
16 Foot
17 Push bar holder
18 Push bar
19 Screws size M8 x 40
20 Screws size M8 x 16
21 Washers for wheels
22 Securing split pins for wheels
23 Nuts M8
24 Screwdriver
25 Spark plug wrench
26 Oil filler funnel
4. Intended use
The device is designed for applications
operated with a 230 V alternating current
source.
Be sure to observe the restrictions in the safety
instructions. The generator is intended to
provide electric power tools and light sources
with electricity. When using the device with
household appliances, please check their
suitability in accordance with the relevant
manufacturer’s instructions. In case of doubt,
ask an authorized dealer of the respective
equipment.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user/operator and
not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the equipment is used in commercial,
trade or industrial businesses or for equivalent
purposes.
GB
9
Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 9