Parkside PSE 2800 A1 - Manual (Page 14)

10. Troubleshooting guide
Fault Cause Remedy
Engine does not start Automatic oil cut-out has not
responded
Spark plug fouled
No fuel
Check oil level, top up engine
oil
Clean or replace spark plug
(electrode spacing 0.6 mm)
Refuel / have the petrol cock
checked
Generator has too little or no
voltage Controller or capacitor
defective
Overcurrent circuit-breaker has
triggered
Air filter dirty
Contact your dealer
Actuate the circuit-breaker and
reduce the consumers
Clean or replace the filter
GB
14
Anleitung_4152412_LB4:_ 26.10.2011 16:18 Uhr Seite 14