Parkside PSG 50 B2 - Manual (Page 30)

30 GB
Introduction / General safety advice for electrical power tools Introduction
Power carving tool PSG 50 B2
Q Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use
are part of the product. They contain important infor-
mation concerning safety, use and disposal. Before
using the product, please familiarise yourself with
all of the safety information and instructions for use.
Only use the unit as described and for the specified
applications. If you pass the product on to anyone
else, please ensure that you also pass on all the
documentation with it.
Q
Proper use
This carving device is intended for processing all
types of wood. For example, it can be used for
carving, renovating furniture, refurbishing antiques,
fine paint stripping and linocuts. Any other use or
modification to the drill / grinder shall be considered
as improper use and could give rise to considerable
dangers. The manufacturer will not accept liability
for loss or damage arising from improper use. Not
intended for commercial use.
Q Equipment
1 ON / OFF switch
2 Bracket
3 Mains lead with plug
4 Ventilation slots
5 Tool holder
6 Cap nut
7 Blade inserts
8 Key
Q
Scope of Delivery
1 Motor carving device PSG 50 B2
3 Blade inserts
1 Key
1 Operating Instructions
The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Keep children away from electrical
power tools!
V~
Volt (AC)
Caution – electric shock!
Danger to life!
W
Watts (Effective power)
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
n
0
Design no-load speed
Wear hearing protection, dust protection
mask, protective glasses and protective
gloves.
Observe caution and safety notes!
Dispose packaging and appliance in
an environmentally-friendly way!
Risk of explosion!!