Epson Stylus Photo RX700 - Manual (Page 7)

continue continue
3 When you see this screen, click Install.
Note: If you don’t see this screen, do the following:
Windows XP: Click Start > My Computer. Then double-click the
Epson CD-ROM icon.
Windows 98/Me/2000: Double-click My Computer. Then double-
click the Epson CD-ROM icon.
4 Read the license agreement, then click Agree. Several messages
display on your screen.
5 When you see this screen, plug the flat end of the USB cable into any
available USB port on your computer.
6 Click Next to continue the installation.
Note: It will take several minutes to install the software. Click Next or
Finish, as prompted. Don’t cancel the installation.
7 When the installation is complete, print a test page, if desired. Then
click
Next to install optional software.
8 Follow the instructions on the screen to install the software. When done,
click
Exit.
9 When you see the Product Registration screen, register your RX700 as
instructed, then remove the CD-ROM and restart your computer.
Now you’re ready to copy, scan, and print. See the Basics book or your
on-screen Reference Guide for instructions.
Macintosh
1 Insert your RX700 software CD-ROM into your CD-ROM or DVD drive.
2 Double-click the Epson CD-ROM icon, if necessary. Then double-
click the Epson installer icon. You see this screen:
3 Click Install.
4 Read the license agreement, then click Agree.
Note: Enter your administrator name and password, if necessary.
5 Click Install at the EPSON Scan Installer screen to install the scanner
portion of your software.
6 When the software finishes installing, click Quit.
7 Follow the on-screen instructions to install additional software.
Note: Click Quit when each part finishes installing.
8 When installation is complete, you see the Additional Software screen.
Follow the instructions on the screen to install the software. When
done, click
Exit.
9 Close any open screens, remove the CD-ROM, and restart your
Macintosh.
10 Plug the flat end of the USB cable into any available USB port on
your Macintosh.
Follow the instructions below to add the RX700 to the Print Center
(OS X 10.2.x) or Printer Setup Utility (OS X 10.3.x).
Selecting the RX700
1 Open the OS X Applications folder, then open the Utilities folder and
start Print Center or the Printer Setup Utility.
If you see this screen, click Add.
2 On the Printer List screen, click the Add button.
3 On the next screen, select EPSON
USB from the pull-down menu.
4 Click Stylus Photo RX700.
Note: If the RX700 doesn’t
appear, make sure it is turned
on and securely connected to
your Macintosh.
5 Click the Add button. You see
the Stylus Photo RX700 in the
Printer List.
6 Quit Print Center or the Printer Setup Utility. Now you’re ready to
copy, scan, and print. See the Basics book or your on-screen
Reference Guide for instructions.
Epson and Epson Stylus are registered trademarks of Seiko Epson Corporation. Epson Store and
SoundAdvice are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be
trademarks of their respective owners. Epson disclaims any and all rights in those marks.
© 2005 Epson America, Inc. 4/05
For the best prints and copies, use genuine Epson ink and paper. You
can purchase them from an authorized Epson reseller. To find the nearest
reseller, please call 800-GO-EPSON (800-463-7766). To purchase online,
visit www.epsonstore.com (U.S. sales only). In Canada, please call
(800) 463-7766 for reseller referral.
T559120 T559220 T559320 T559420
Black Ink Cyan Ink Magenta Ink Yellow Ink
Cartridge Cartridge Cartridge Cartridge
T559520 T559620
Light Cyan Light Magenta
Ink Cartridge Ink Cartridge
Premium Glossy Photo Paper
Heavyweight paper with a high gloss finish
that lets you create borderless photos with no
perforated edges. Available in 4 x 6, 5 x 7, 8 x 10,
and Letter sizes.
Matte Paper Heavyweight
Perfect for high-quality photo reprints and
enlargements.
PremierArt™ Matte Scrapbook Photo Paper
for Epson
Ideal for printing beautiful-quality matte photos
and scrapbook-safe elements.
Semigloss Scrapbook Photo Paper
Perfect for printing satin-finish photos that stand
out against the traditional matte background of
your scrapbook pages.
Need Ink and Paper?
If you are having a problem with your RX700, check the message on the
control panel. Try turning the RX700 off and then back on to clear the error.
If your problem is listed here, try these suggestions. For more information,
see your Basics book, software Help, or on-screen Reference Guide.
The Found New Hardware Click Cancel and disconnect the RX700.
Wizard appears on Install the software as described on this
your screen. sheet.
You see an error message Make sure your RX700 is connected to your
when you try to print computer, plugged into a power source, and
or scan. turned on.
The RX700 doesn’t work. Make sure you have unlocked the scanner,
as described in section 2. Turn the RX700
off and then on again.
Make sure the ink cartridges are pushed all
the way in and the covers are closed.
Make sure your RX700 software is installed
correctly.
The Stylus Photo RX700 Make sure the scanner lock is in the unlocked
makes noise after you position, as shown on the front of this sheet.
turn it on. After releasing it, turn off the RX700, wait a
moment, then turn it back on.
It is normal for the RX700 to make whirring
sounds after you turn it on.
Any Problems?
Here’s where to look for answers:
Epson Stylus Photo RX700 Basics
Includes instructions on copying, printing, and scanning
without a computer.
On-screen Reference Guide
Explains how to use your RX700 with a
computer. Double-click the
Reference Guide
icon on your desktop to view the guide.
On-screen help for ArcSoft PhotoImpression™ , EPSON Scan, and
EPSON Print CD
Click the Help button or question mark that appears on the screen
when you’re using any of these programs.
Epson Technical Support (Stylus Photo RX700, EPSON Scan, and
EPSON Print CD)
• World Wide Web
http://support.epson.com
• Automated Telephone Services
To use these services, you must have a touch tone telephone and call
(800) 922-8911. Your Epson SoundAdvice
SM Express Code is 70635.
Use this code to quickly select your product in SoundAdvice.
• To speak to a Technical Support Representative
Dial (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6
AM to 6 PM ,
Pacific Time, Monday through Friday. Toll or long distance charges
may apply.
Software Technical Support
Software Telephone and Fax Internet and E-mail
ArcSoft (510) 440-9901 www.arcsoft.com/en/support
PhotoImpression 8:30 AM to 5:30 PM , [email protected]
Pacific Time,
Monday–Friday
Fax: (510) 440-1270
Any Questions?