Parkside PPC 30 - Manual (Page 18)

18
GB MT
PPC30-01
1209op
Scope of Delivery
Unpack the pressure washer and verify the
contents:
- Patio cleaner
- Connection pipe
- Pipe extension
- Adapter
Fitting
• Screw the connection pipe (2) into
the pivoting connector (3).
• To extend your reach, snap on and
turn the bayonet mount of the pipe
extension (1) to the connection pipe
(2).
• To connect to the pressure washer,
snap the bayonet mount into the
pressure washer’s jet gun.
• The adapter (6) has a bayonet
mount which you can choose to
snap in after the connection pipe (2)
or after the pipe extension (1).
Start-up
Take heed of the backstroke generated
by the jet of water. Stand firmly and
hold the jet gun tightly. You may other-
wise injure yourself or others.
• Do not release water from the pres-
sure washer until the patio cleaner
rests on the surface you are clean-
ing.
• Always hold the patio cleaner by
the handle (5) when washing down
walls.
• Avoid the patio cleaner going over
free corners.
• The patio cleaner is not designed
for scouring out or scrubbing.
Cleaning and Maintenance
Cleaning
Always keep the washer clean. Do not use
any detergents or solvents.
• Only clean the pressure washer
with a soft brush or a slightly moist
cloth.
Maintenance
The patio cleaner is maintenance-free.
Ask our service centre to carry out any
work that is not described in these in-
structions. Use only original parts.
Storage
• Store the patio cleaner in a frost-free
room.
Waste Disposal and
Environmental Protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling cen-
tre when you have finished with them.
Electric appliances should not be dis-
posed of in the domestic garbage.
Hand the tool in at a recycling centre. The plas-
tics and metal parts can be separated and recy-
cled. Ask your Service Center about this.