beautypg.com

Wet vacuuming, Blow function, Cleaning/maintenance/ storage – Parkside PNTS 1400 A1 User Manual

Page 9: Gb ie

background image

9

GB IE

Vacuuming.fine.dust:

While vacuuming fine dust, you

may find dirt accumulating faster

than usual. For this reason, we

recommend the use of a paper fil-

ter bag for fine dust.

1. Fit the pleated filter (20).

2. Completely unfold the paper filter bag

(21) and pull it over the internal suction

nozzle (5) in the stainless steel con-

tainer (6) (see

). The connector on

the suction nozzle must be completely

enclosed by the sealing ring on the fil-

ter bag opening.

Wet vacuuming

For wet vacuuming or to vacuum water, fit

the foam filter (18) to the filter basket on

the motor head (1).

When the container is full, the suc-

tion opening is shut off by a float,

and suction is then cut off.

Switch the appliance off, remove

the plug from the socket and

empty the container (see Cleaning/

Maintenance/Storage).

If foam or liquid exits, switch off the

machine immediately.

Blow Function

• To blow, take off the air diffuser (17)

(bayonet fixing).

• Screw the suction hose (15) (bayonet

fixing) onto the blow connection (11)

on the motor head (1).

Cleaning/Maintenance/

Storage

Pull out the mains plug.

Danger of electric shock.

Always check the appliance before

use for any obvious faults such as

a defective mains cable, and have

these repaired or replaced.

Cleaning.the.Equipment:

Never.hose.the.appliance.down.

with.water..Never.use.aggres-

sive.cleaning.agents.or.sol-

vents..This.could.damage.the.

appliance..

• After use, empty the stainless steel

container ( No. 6). Opening the

drain plug to allow the vacuumed liquid

to drain out ( No. 7).

A liquid residue remains in the con-

tainer.

• Clean the waste tank with a damp cloth.

• Wash the foam filter ( No. 18) with

lukewarm water and soap, and allow

to dry.

• Beat the dust out of the fluted filter

( No. 20) and clean it with a paint

brush or hand brush.

• Replace the paper filter bag (

No. 21) when full (see “replacement

parts” for reordering)

• Wash out the air diffuser filter (see

no. 17) with lukewarm water and soap

a leave it to dry.

Storage:

- To store, wind the mains power

cable (12) around the cable

holder (9) on the back of the