Warranty, Eu declaration of conformity, Gb ie – Parkside PNTS 1400 A1 User Manual
Page 11
11
GB IE
Warranty
This unit has a guarantee period of 36
months, or 12 months for units used on a
commercial basis or for replacement units
according to the statutory regulations. Dam-
age resulting from normal wear and tear,
overloading or improper use is excluded
from the warranty. Certain parts such as the
filters and attachments are subject to normal
wear and tear and are excluded from the
warranty.
Warranty claims can only be recognised if
the directions in the Operating Instructions
on cleaning and maintenance have been
followed. Damage resulting from material
defects or manufacturing errors will be recti-
fied at no extra charge by replacement or
repair, on condition that the appliance has
not been dismantled and is returned to our
Service Centre with proof of purchase and
guarantee (see addresses page 13).
You can have repairs which are not covered
by the warranty carried out by our Service
Center which will charge you for this. They
will be happy to draw up a cost estimate for
you.
We can only carry out work on machines
which have adequate packaging and post-
age.
Warning: In the case of a warranty claim or
a service, please deliver your machine to our
service address in a clean condition accom-
panied by a description of the problem.
Machines.sent.without.prepaid.postage.
–.as.bulky.goods,.express,.or.by.special.
freight.–.will.not.be.accepted.
If you have a justified guarantee claim,
please contact our service centre by tel-
ephone, which will then advise you on how
the claim will be processed.
Defective units returned to us will be dis-
posed of for free.
EU declaration
of conformity
We hereby confirm that the
wet.and.dry.vacuum.cleaner..
model.series.PNTS.1400.A1
Serial no. 1006000601-1008090417
conforms with the following applicable rel-
evant version of the EU guidelines
as of model year 2010:
2004/108/EC.•.2006/95/EC
In order to guarantee consistency, the fol-
lowing harmonised standards as well as
national standards and stipulations have
been applied:
EN.60335-1/A13:2008
EN.60335-2-2/A2:2006
EN.55014-1:2006
EN.55014-2:1997/A1:2001.
EN.61000-3-2:2006
EN.61000-3-3:1995/A2:2005
EN.62233:2008
Grizzly Gartengeräte GmbH & Co. KG
Am Gewerbepark 2
64823 Groß-Umstadt 18.05.2010
Andreas Gröschl
(Technical Manager and
Documentation Representative)