Echo 99944200485 User Manual
Page 8
8
Parts Required: PAS or SRM-SB Power Head w/Shaft & Coupling.
1. Set Power Head/Shaft Assembly on a level surface.
2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to
lock-out position.
3. Remove vinyl cap from attachment drive shaft.
4. Remove cardboard spacer, if necessary.
5. Carefully fit attachment drive shaft assembly into coupler (B) to
decal assembly line (C), making sure that the inner lower drive
shaft engages into the square upper drive shaft socket.
NOTE
Earlier model Power Heads may have shorter couplings. Short
couplings fit flush to decal point (E). New couplings are 4-3/4 in.
long, and fit flush to line (C).
C
onTenTs
The ECHO product you have purchased has been factory pre-assembled for your convenience.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
_____ 1 - Shaft Hedge Clipper Attachment
_____ 1 - Operators Manual
_____ 1 - Safety Manual
_____ 1 - Warranty Card
_____ 1 - Blade Cover
_____ 1 - Storage Hook Assembly
a
ssembly
power
head
shafT
/
lower
shafT
assembly
WARNING
Do not perform maintenance or assembly procedures with engine running.
A
B
D
F
E
C